Modelo para la Predicción Energética de una Instalación Hotelera

  1. Adriana V. Acosta 1
  2. Jesús M. Zamarreño 2
  3. Ana I. González 1
  4. Víctor Álvarez 3
  1. 1 Instituto Superior Politécnico José Antonio Echeverría
  2. 2 Universidad de Valladolid
    info

    Universidad de Valladolid

    Valladolid, España

    ROR https://ror.org/01fvbaw18

  3. 3 Hotel Meliá Habana
Show affiliations +
Journal:
Revista iberoamericana de automática e informática industrial ( RIAI )

ISSN: 1697-7920

Year of publication: 2011

Volume: 8

Issue: 4

Pages: 309-322

Type: Article

DOI: 10.1016/J.RIAI.2011.09.001 DIALNET GOOGLE SCHOLAR lock_openOpen access editor

More publications in: Revista iberoamericana de automática e informática industrial ( RIAI )

Abstract

This paper shows the development and validation of an energy prediction model for Meliá Havana hotel located at Havana (Cuba). The model is based on the Radiant Time Series for obtaining the thermal load in room blocks of the building. The model has been implemented in Matlab®. Experimental validation of the model is performed based on real measurements for the daily energy consumption of the hotel. The model is valuable for studying the energy behaviour and for implementing advanced control strategies.

Bibliographic References

  • Acosta C. A, and A.I. González, 2007. Primera aproximación a un modelo de predicciones energéticas de habitación hotelera. Simposio CIE 2007. Santa Clara, Cuba.
  • Acosta C.A., A. I. González and V. Castelló, 2008a Obtención de un modelo de predicciones energéticas de habitación hotelera. Conferencia FIE2008. Santiago de Cuba, Cuba.
  • Acosta C. A., A. I. González, J.M. Zamarreño and V. Castelló, 2008b. A model for energy predictions of a hotel room. 20th European Modeling and Simulation Symposium. (Simulation in Industry). Briatico, Italy
  • ASHRAE,1997. ASHRAE Handbook. Chapter 28, Nonresidential cooling and heating load calculation procedures. ASHRAE Handbook Editor.
  • ASHRAE, 2005a. ASHRAE Handbook. Chapter 30, Nonresidential cooling and heating load calculation procedures. ASHRAE Handbook Editor.
  • ASHRAE, 2005b ASHRAE Handbook. Chapter 32, Energy Estimating and modeling methods. ASHRAE Handbook Editor.
  • ASHRAE. 2007. ASHRAE Handbook. Chapter 5, Hotels, Motels, and Dormitories. ASHRAE Handbook Editor.
  • ASHRAE. 2009. ASHRAE Handbook. Chapter 15, Fenestration. ASHRAE Handbook Editor.
  • Budaiwi I.M,.2003. Air conditioning system operation strategies for intermittent occupancy building in a hot -sumid climate. King Fahd University of petroleum and minerals architectural, Engineering Department. Proceedings: Building Simulation 2007.
  • Castilla, M.M., J. D. Alvarez, M. Berenguel, M. Pérez, F. Rodríguez and J.L. Guzmán. 2010. Técnicas de control del confort en edificios. RIAI Vol. 7, No. 3, pp 5-24.
  • Crawley D.B., L.K. Lawrie, F.C. Winkelmann, W.F. Buhl, Y. Joe Huang, C.O. Pedersen, R.K. Strand, R.J. Liesen, D.E. Fisher, M.J. Witte, and J. Glazer., 2001. EnergyPlus: Creating a new-generation building energy simulation program. Energy and Buildings 33(4):319-331.
  • D. Li, T. Lam, W. Chan and A. Mak, 2009. Energy and cost analysis of semi-transparent photovoltaic in office buildings. Applied Energy, 19 pp 722–729.
  • F. Gugliermetti, G. Passerini and F. Bisegna, 2004. Climate models for the assessment of office buildings energy performance. Building and Environment, Vol. 39, pp 39-50.
  • Fangting Song, Yi Jiang, Anne Le Mouel and Jean-Jacques Roux, 2007. Development of a data model for energy consumption analysis and prediction of large-scale commercial buildings. Proceedings: Building Simulation 2007, pp 1601.
  • Fumio Sakurai, Dr. Tatsuo Inooka, Dr. Ryuji Yanagihara , Etsuo Higashizawa, Junya Hamane, Tatsuo Fujii, Hisashi Nishihata, Hideto Hayashi, Fumihiro ArizumiHiroshi Ninomiya, Kazusa Koik Naoko Shinohara, 2007. FACES (Forecast of air-conditioning system’s energy, environmental, and economical, performance by simulation). Proceedings: Building Simulation 2007. Japan.
  • González Santos A. I., 1996. Sistema de regulación automático para controlar el índice de confort en ambientes climatizados. Tesis de Maestría en Automática, ISPJAE. Cuba.
  • Hernández N. A., Sanzovo Fiorelli F. A., 2007 Use of simulation tools managing buildings energy demand. Proceedings: Building Simula Conference 2007, pp 1883.
  • Hittle, D.C., 1999. The effect of beam solar radiation on peak cooling loads. ASHRAE Transactions, 105(2):510-13.
  • Ip Seng Iu., 2002. Experimental validation of the radiant time series method for cooling load calculations. Thesis of the Degree of Mast of Science. Oklahoma State University
  • Iu, Pisen Calvin, 2004. PRF/RTF Generator Software.
  • Ljung and Lennart, 1999. System Identification theory for the user. Prentice Hall 2nd edition.
  • M. A. Aktacir, O. Büyükalaca, H. Bulut and T. Yilmaz,.2008. Influence of different outdoor design conditions on design cooling load and design capacities of air conditioning equipments. Energy Conversion and Management, 49, 6, pp. 1766-1773.
  • MathWorks, 2007. Matlab 7.4.0. Ayuda de la herramienta, versión 7.0.
  • McQuiston, F.C. and J.D. Spitler, 1992. Cooling and heating load calculation manual. 2nd ed. ASHRAE.
  • Mingxian Cui and Tingyao Chen., 2009. A revised radiant time series (RTS) method for intermittent cooling load calculation. Eleventh International IBPSA Conference. Glasgow, Scotland.
  • Pantelis N. Botsaris and Spyridon Prebezanos., 2004. A methodology for a thermal energy building audit. Building and Environment, Vol.39, pp. 195 – 199.
  • Pedrini, F.S. Westphal and R. Lamberts, 2002. A methodology for building enegy modeling and calibration in warm climates. Buildings and Environment, Vol. 37, pp 903 – 912.
  • S. Chirarattananon and J. Taveekun,.2004. An OTTV-based energy estimation model for commercial buildings in Thailand. Energy and Buildings, Vol. 36, Issue 7, July, pp 680-689.
  • Sowell E.F. ,1988. Cross-check and modification of the DOE-2 program for calculation of zone weighting factors. ASHRAE Transactions 94 (2):737-53.
  • Spitler J.D. and D.E. Fisher. 1999. Development of periodic response factors for use with the raciant time series method. ASHRAE Transactions, 105(2)
  • T. Chen and M. Cui, 2010. A RTS-based method for direct and consistent calculating intermittent peak cooling loads. Energy Conversion and Management, 51, 6, pp. 1170-1178.
  • Trott A. R. and Welch T, 2000. Refrigeration and air-conditioning., Third edition by Butterworth-Heinemann.
  • U.S. Army,1979. BLAST, the building loads analysis and system thermodynamics programa - Users manual. U.S. Army Construction Engineering Research Laboratory Report E-153.l
  • US Department of Energy, 2005. ENERGYPLUSTM, Input Output Reference.
  • Westphal F.S. and R. Lamberts., 2005. Building Simulation Calibration Using Sensitivity Analysis. 9th International IBPSA Conference, August.
  • Y. Pan, Z. Huang, G. Wu and C. Chen.,2006. The application of building energy simulation and calibration in two high rise commercial buildings in Shangai. Proceedings: Building Simulation Conference 2007, pp 1889.
  • Yik F.W.H., J. Burnett and I. Prescott, 2001. Predicting air-conditioning energy consumption of a group of buildings using different heat rejection methods. Energy and Buildings, Vol. 33, pp 151-166.
  • York D.A. and C.C. Cappiello, eds, 1982. DOE-2 engineers manual. Lawrence Berkeley Laboratory Report LBL-11353 (LA-8520-M, DE83004575). National Technical Information Services, Springfield, VA.
Data source: Dialnet