Herramientas para la gestión de riesgos en cadenas de suministrouna revisión de la literatura

  1. Alina Díaz Curbelo 1
  2. Ángel Manuel Gento Municio 2
  3. Fernando Marrero Delgado 2
  1. 1 Departamento de Ingeniería Industrial (Universidad Central ¨Marta Abreu¨ de Las Villas, Cuba)
  2. 2 Universidad de Valladolid
    info

    Universidad de Valladolid

    Valladolid, España

    ROR https://ror.org/01fvbaw18

Revista:
Dirección y organización: Revista de dirección, organización y administración de empresas

ISSN: 1132-175X

Ano de publicación: 2018

Número: 64

Páxinas: 5-35

Tipo: Artigo

DOI: 10.37610/DYO.V0I64.519 DIALNET GOOGLE SCHOLAR lock_openAcceso aberto editor

Outras publicacións en: Dirección y organización: Revista de dirección, organización y administración de empresas

Resumo

El incremento de las cadenas de suministro globales, a pesar de sus grandes beneficios, las convierte en más vulnerables y con mayores niveles de riesgo. En este artículo se ha llevado a cabo una revisión sistemática de la literatura sobre los métodos utilizados para la Gestión de Riesgos de Cadenas de Suministro, tanto cualitativos como cuantitativos, centrados en alguna fase del ciclo de gestión de riesgos y en el ciclo completo (identificación, evaluación, mitigación, seguimiento), así como los principales campos de aplicación. Por último, se identifican nuevas oportunidades y retos como líneas futuras de investigación.

Referencias bibliográficas

  • 1. ABUSWER, M., AMYOTTE, P., KHAN, F. y MORRISON, L. (2013). An optimal level of dust explosion risk management: framework and application. Journal of Loss Prevention in the Process Industries, 26(6), pp. 1530-1541
  • 2. ADHITYA, A., SRINIVASAN, R. y KARIMI, I. A. (2009). Supply Chain Risk Identification Using a HAZOP-based Approach. American Institute of Chemical Engineers, 55, pp. 1447–1463.
  • 3. AGGARWAL, P. y GANESHAN, R. (2007). Using Risk-management Tools on B2Bs: An Exploratory Investigation. International Journal of Production Economics, 108, pp. 2–7.
  • 4. AQLAN, F. y LAM, S. S. (2015). A fuzzy-based integrated framework for supply chain risk assessment. International Journal of Production Economics, 161, pp. 54–63.
  • 5. AQLAN, F. y MUSTAFA, E. (2014). Integrating lean principles and fuzzy bow-tie analysis for risk assessment in chemical industry. Journal of Loss Prevention in the Process Industries, 29(1), pp. 39-48
  • 6. ARCELUS, F. J. KUMAR, S. y SRINIVASAN, G. (2012). Risk Tolerance and a Retailer’s Pricing and Ordering Policies within a Newsvendor Framework. Omega 40, pp. 188–198.
  • 7. AVEN, T. (2015). Risk assessment and risk management: Review of recent advances on their foundation. European Journal of Operational Research, 253(1), pp. 1–13.
  • 8. AZADEH, A. y ALEM, S. M. (2010). A Flexible Deterministic, Stochastic and Fuzzy Data Envelopment Analysis Approach for Supply Chain Risk and Vendor Selection Problem: Simulation Analysis. Expert Systems with Applications 37, pp. 7438–7448.
  • 9. AZAD, N. y DAVOUDPOUR, H. (2013). Designing a Stochastic Distribution Network Model under Risk. The International Journal of Advanced Manufacturing Technology 64, pp. 23–40.
  • 10. AZARON, A. BROWN, K. N., TARIM, S. A. y MODARRES, M. (2008). A Multi-objective Stochastic Programming Approach for Supply Chain Design Considering Risk. International Journal of Production Economics, 116, pp. 129–138.
  • 11. BADREDDINE, A. y BEN AMOR, N. (2013). A Bayesian approach to construct bow tie diagrams for risk evaluation. Process Safety and Environmental Protection, 91(3), pp. 159-171.
  • 12. BAGHALIAN, A., REZAPOUR, S. y FARAHANI, R. Z. (2013). Robust Supply Chain Network Design with Service Level against Disruptions and Demand Uncertainties: A Real-life Case.” European Journal of Operational Research 227, pp. 199–215.
  • 13. BALLOU, R. H. y BURNETAS, A. (2003). Planning Multiple Location Inventories. Journal of Business Logistics 24, pp. 65–89.
  • 14. BEHÚN, M., KLEINOVÁ, J. y KAMARYT, T. (2014). Risk Assessment of Non-repetitive Production Processes. Procedia Engineering, 69, pp. 1281–1285.
  • 15. BEN-TAL, A., CHUNG, B. D., MANDALA, S. R. y YAO, T. (2011). Robust Optimization for Emergency Logistics Planning: Risk Mitigation in Humanitarian Relief Supply Chains. Transportation Research Part B: Methodological 45, pp. 1177–1189.
  • 16. BERGER, P. D., GERSTENFELD, A. y ZENG. A. Z. (2004). How Many Suppliers Are Best? A Decision-analysis Approach. Omega 32, pp. 9–15.
  • 17. BERLE, Ø. NORSTAD, I. y ASBJØRNSLETT, B. E. (2013). Optimization, Risk Assessment and Resilience in LNG Transportation Systems. Supply Chain Management: An International Journal 18, pp. 253–264.
  • 18. BETTS, J. M. y JOHNSTON, R. B. (2005). Just-in-time Component Replenishment Decisions for Assemble-to-order Manufacturing under Capital Constraint and Stochastic Demand. International Journal of Production Economics 95, pp. 51–70.
  • 19. BIDDER, O. R., ARANDJELOVIĆ, O., ALMUTAIRI, F., SHEPARD, E. L. C., LAMBERTUCCI, S. A., QASEM, L. A. y WILSON, R. P. (2014). A risky business or a safe BET? A Fuzzy Set Event Tree for estimating hazard in biotelemetry studies. Animal Behaviour, 93, pp. 143–150.
  • 20. BLACKHURST, J. V., SCHEIBE, K. P. y JOHNSON. D. J. (2008). Supplier Risk Assessment and Monitoring for the Automotive Industry. International Journal of Physical Distribution & Logistics Management 38, pp. 143–165.
  • 21. BLOME, C. y SCHOENHERR, T. (2011). Supply Chain Risk Management in Financial Crises – A Multiple Case-study Approach. International Journal of Production Economics 134, pp. 43–57.
  • 22. BLOS, M. F., M. QUADDUS, WEE, H. M. y WATANABE, K. (2009). Supply Chain Risk Management (SCRM): A Case Study on the Automotive and Electronic Industries in Brazil. Supply Chain Management: An International Journal, 14, pp. 247–252.
  • 23. BOGATAJ, D. y BOGATAJ, M. (2007). Measuring the Supply Chain Risk and Vulnerability in Frequency Space. International Journal of Production Economics, 108, pp. 291–301.
  • 24. BRADLEY, J. R. (2014). An improved method for managing catastrophic supply chain disruptions. Business Horizons, 57(4), pp. 483–495.
  • 25. BRAGLIA, M. (2000). MAFMA: Multi-attribute failure mode analysis. International Journal of Quality & Reliability anagement, 17(9), pp. 1017–1033.
  • 26. BRAGLIA, M., FROSOLINI, M. y MONTANARI, R. (2003). Fuzzy criticality assessment model for failure modes and effects analysis. International Journal of Quality & Reliability Management, 20(4), pp. 503–524.
  • 27. BRAUNSCHEIDEL, M. J. y SURESH, N. C. (2009). The Organizational Antecedents of a Firm’s Supply Chain Agility for Risk Mitigation and Response. Journal of Operations Management, 27, pp.119–140.
  • 28. BRUN, A., CARIDI, M., SALAMA, K. F. y RAVELLI, I. (2006). Value and Risk Assessment of Supply Chain Management Improvement Projects. International Journal of Production Economics, 99, pp. 186–201.
  • 29. CACHON, G. P. (2004). The Allocation of Inventory Risk in a Supply Chain: Push, Pull, and Advance-purchase Discount Contracts. Management Science, 50, pp. 222–238.
  • 30. CARVALHO, H., BARROSO, A.P., MACHADO, V.H., AZEVEDO, S. y CRUZ-MACHADO, V. (2012). Supply chain redesign for resilience using simulation. Computers & Industrial Engineering. 62, pp. 329–341.
  • 31. CASSANELLI, G., MURA, G., FANTINI, F., VANZI, M. y PLANO, B. (2006). Failure Analysis-assisted FMEA. Microelectronics Reliability, 46(9-11), pp. 1795–1799.
  • 32. CAVINATO, J. L. (2004). Supply Chain Logistics Risks: From the Back Room to the Board Room. International Journal of Physical Distribution & Logistics Management, 34, pp. 383–387.
  • 33. CHAN, F. T. S. y KUMAR., N. (2007). Global Supplier Development Considering Risk Factors Using Fuzzy Extended AHP-based Approach. Omega, 35, pp. 417–431.
  • 34. CHANG, C. L., LIU, P. H. y WEI, C. C. (2001). Failure mode and effects analysis using grey theory. Integrated Manufacturing Systems, 12(3), pp. 211–216.
  • 35. CHAUDHURI, A., MOHANTY, B. K. y SINGH, K. N. (2013) Supply Chain Risk Assessment during New Product Development: A Group Decision Making Approach Using Numeric and Linguistic Data. International Journal of Production Research, 51, pp. 2790–2804.
  • 36. CHEN, F. Y. y YANO C. A. (2010). Improving Supply Chain Performance and Managing Risk under Weather related Demand Uncertainty. Management Science, 56, pp. 1380–1397.
  • 37. CHEN, H., CHEN, J. y CHEN, Y. (2006) A Coordination Mechanism for a Supply Chain with Demand Information Updating. International Journal of Production Economics, 103, pp.347–361.
  • 38. CHEN, J., SOHAL, A.S. y PRAJOGO, D.I. (2013). Supply chain operational risk mitigation: a collaborative approach. International Journal of Production Research, 51 (7), pp. 2186–2199.
  • 39. CHEN, P.-S. y WU, M.-T. (2013). A modified failure mode and effects analysis method for supplier selection problems in the supply chain risk environment: A case study. Computers & Industrial Engineering, 66(4), pp. 634–642.
  • 40. CHEONG, T. y SONG H. S. (2013). The Value of Information on Supply Risk under Random Yields. Transportation Research Part E: Logistics and Transportation Review, 60, pp. 27–38.
  • 41. CHEVERAU, F. WYBO, J. y CAUCHOIS, D. (2006). Organizing learning process on risks by using the bow-tie representation. Journal of Hazardous Materials, 130(3), pp. 276-283.
  • 42. CHIN, K.-S., WANG, Y.-M., POON, G. K. K. y YANG, J.-B. (2009). Failure mode and effects analysis by data envelopment analysis. Decision Support Systems, 48(1), pp. 246–256.
  • 43. CHIU, C. H., CHOI, T. M. y LI, X. (2011). Supply Chain Coordination with Risk Sensitive Retailer under Target Sales Rebate. Automatic, 47, pp. 1617– 1625.
  • 44. CHOPRA, S., REINHARDT, G. y MOHAN, U. (2007). The Importance of Decoupling Recurrent and Disruption Risks in a Supply Chain. Naval Research Logistics, 54, pp. 544–555.
  • 45. CHOPRA, S. y SODHI, M. S. (2004). Managing Risk to Avoid Supply chain Breakdown. MIT Sloan Management Review, 46, pp. 53–62.
  • 46. CHRISTOPHER, M., y LEE, H. (2004). Mitigating Supply Chain Risk through Improved Confidence. International Journal of Physical Distribution & Logistics Management, 34, pp. 388–396.
  • 47. CHRISTOPHER, M., MENA, C., KHAN, O. y YURT, O. (2011). Approaches to Managing Global Sourcing Risk. Supply Chain Management: An International Journal, 16, pp. 67–81.
  • 48. CHRISTOPHER, M. y PECK, H. (2004). Build-ing the Resilient Supply Chain. The International Journal of Logistics Management, 15, pp. 1–14.
  • 49. CIGOLINI, R. y ROSSI, T. (2010). Managing Operational Risks along the Oil Supply Chain. Production Planning & Control, 21, pp. 452–467.
  • 50. COLICCHIA, C., DALLARI, F. y MELACINI, M. (2010). Increasing Supply Chain Resilience in a Global Sourcing Context. Production Planning & Control, 21, pp. 680–694.
  • 51. COSTANTINO, N. y PELLEGRINO, R. (2010). Choosing between Single and Multiple Sourcing Based on Supplier Default Risk: A Real Options Approach. Journal of Purchasing & Supply Management, 16, pp. 27–40.
  • 52. CRAIGHEAD, C. W., BLACKHURST, J., RUNGTUSANATHAM, M. J. y HANDFIELD, R. B. (2007). The Severity of Supply Chain Disruptions: Design Characteristics and Mitigation Capabilities. Decision Sciences, 38, pp. 131–156.
  • 53. CRNKOVIC, J., TAYI, G. K. y BALLOU, D. P. (2008). A Decision-support Framework for Exploring Supply Chain Tradeoffs. International Journal of Production Economics, 115, pp.28–38.
  • 54. CRUZ, J. M. (2009). The Impact of Corporate Social Responsibility in Supply Chain Management: Multicriteria Decision-making Approach. Decision Support Systems, 48, pp. 224–236.
  • 55. CRUZ, J. M. (2013). Mitigating Global Supply Chain Risks through Corporate Social Responsibility. International Journal of Production Research, 51, pp. 3995–4010.
  • 56. CRUZ, J. M., NAGURNEY, A. y WAKOLBINGER, T. (2006). Financial Engineering of the Integration of Global Supply Chain Networks and Social Networks with Risk Management. Naval Research Logistics, 53, pp. 675–696.
  • 57. CUCCHIELLA, F. y GASTALDI, M. (2006). Risk Management in Supply Chain: A Real Option Approach. Journal of Manufacturing Technology Management, 17, pp. 700–720.
  • 58. CURCURÙ, G., GALANTE, G. M. y LA FATA, C. M. (2012). Epistemic uncertainty in fault tree analysis approached by the evidence theory. Journal of Loss Prevention in the Process Industries, 25(4), pp. 667–676
  • 59. DATTA, S., GRANGER, C. W. J., BARARI, M. y GIBBS, T. (2007). Management of Supply Chain: An Alternative Modelling Technique for Forecasting. Journal of the Operational Research Society, 58, pp. 1459–1469.
  • 60. DI RITO, F. (2016). Impacts of safety on the design of light remotely-piloted helicopter flight control systems. Reliability Engineering and System Safety, 149, pp. 121-129.
  • 61. DIABAT, A., K. GOVINDAN, y PANICKER. V. V. (2012). Supply Chain Risk Management and Its Mitigation in a Food Industry. International Journal of Production Research, 50, pp. 3039–3050.
  • 62. DIETRICH, D. M., y CUDNEY, E. A. (2011). Methods and Considerations for the Development of Emerging Manufacturing Technologies into a Global Aerospace Supply Chain. International Journal of Production Research, 49, pp. 2819–2831.
  • 63. DOWTY, R. A. y WALLACE, W. A. (2010). Implications of Organizational Culture for Supply Chain Disruption and Restoration. International Journal of Production Economics,126, pp.57–65.
  • 64. DUROWOJU, O. A. CHAN, H. K. y WANG, X. (2012). Entropy Assessment of Supply Chain Disruption. Journal of Manufacturing Technology Management, 23, pp. 998–1014. 65. ELLEGAARD, C. (2008). Supply Risk Management in a Small Company Perspective. Supply Chain Management: An International Journal, 13, pp. 425–434.
  • 66. ELLIS, S. C., HENRY, R. M. y SHOCKLEY, J. (2010). Buyer Perceptions of Supply Disruption Risk: A Behavioral View and Empirical Assessment. Journal of Operations Management, 28, pp. 34–46.
  • 67. FAISAL, M. N., BANWET, D. K. y SHANKAR, R. (2006) Supply Chain Risk Mitigation: Modeling the Enablers. Business Process Management Journal, 12, pp. 535–552.
  • 68. FANG, J., L. ZHAO, FRANSOO, J. C. y WOENSEL, T. V. (2013). Sourcing Strategies in Supply Risk Management: An Approximate Dynamic Programming Approach. Computers & Operations Research, 40, pp. 1371–1382.
  • 69. FERDOUS, R., KHAN, F., SADIQ, R., AMYOTTE, P. y VEITCH, B. (2013). Analyzing system safety and risks under uncertainty using a bow-tie diagram: An innovative approach. Process Safety and Environmental Protection, 91(1-2), pp. 1–18.
  • 70. FERDOUS, R., KHAN, F., SADIQ, R., AMYOTTE, P. y VEITCH, B. (2012). Handling and updating uncertain information in bow-tie analysis. Journal of Loss Prevention in the Process Industries, 25(1), pp. 8-19.
  • 71. FINKE G R, SINGH, M. y RACHEV, S. T. (2010). Operational risk quantification—a risk flow approach. The Journal of Operational Risk, 5(4), pp. 65–89.
  • 72. FLAGE, R. AVEN, T., BARALDI, P. y ZIO, E. (2014).Concerns, challenges and directions of development for the issue of representing uncertainty in risk assessment. Risk Analysis, 34 (7), pp. 1196–1207.
  • 73. FOERSTL, K., C. REUTER, HARTMANN, E. y BLOME, C. (2010) Managing Supplier Sustainability Risks in a Dynamically Changing Environment – Sustainable Supplier Management in the Chemical Industry. Journal of Purchasing & Supply Management, 16, pp. 118–130.
  • 74. FRANCA, R. B., JONES, E. C., RICHARDS, C. N. y CARLSON, J. P. (2010). Multi-objective Stochastic Supply Chain Modeling to Evaluate Tradeoffs between Profit and Quality. International Journal of Production Economics, 127, pp. 292–299.
  • 75. GAUDENZI, B. y BORGHESI, A. (2006). Managing Risks in the Supply Chain Using the AHP Method. The International Journal of Logistics Management, 17, pp. 114–136.
  • 76. GEORGIADIS, M. C., TSIAKIS, P., LONGINIDIS, P. y SOFIOGLOU, M. K. (2011). Optimal Design of Supply Chain Networks under Uncertain Transient Demand Variations. Omega 39, pp. 254–272.
  • 77. GIANNAKIS, M. y LOUIS, M. (2011). A Multiagent Based Framework for Supply Chain Risk Management. Journal of Purchasing & Supply Management, 17, pp. 23–31.
  • 78. GIANNAKIS, M., y PAPADOPOULOS, T. (2015). Supply chain sustainability: A risk management approach. International Journal of Production Economics, 171, pp. 455–470.
  • 79. GIRI, B. C. (2011). Managing Inventory with Two Suppliers under Yield Uncertainty and Risk Aversion. International Journal of Production Economics, 133, pp. 80–85.
  • 80. GIUNIPERO, L. C., y ELTANTAWY, R. A. (2004). Securing the Upstream Supply Chain: A Risk Management Approach. International Journal of Physical Distribution & Logistics Management, 34, pp. 698–713.
  • 81. GLOCK, C. H. y RIES, J. M. (2013) Reducing Lead Time Risk through Multiple Sourcing: The Case of Stochastic Demand and Variable Lead Time. International Journal of Production Research, 51, pp. 43–56.
  • 82. GOH, M., LIM, J. Y. S. y MENG, F. (2007). A Stochastic Model for Risk Management in Global Supply Chain Networks. European Journal of Operational Research, 182, pp. 164–173.
  • 83. GRÖTSCH, V. M., BLOME, C. y SCHLEPER, M. C. (2013) Antecedents of Proactive Supply Chain Risk Management–A Contingency Theory Perspective. International Journal of Production Research, 51, pp. 2842–2867.
  • 84. GÜMÜŞ, M., RAY, S. y GURNANI, H. (2012). Supply-side Story: Risks, Guarantees, Competition, and Information Asymmetry. Management Science, 58, pp. 1694–1714.
  • 85. GUO, Z., FANG, F. y WHINSTON, A. B. (2006) Supply Chain Information Sharing in a Macro Prediction Market. Decision Support Systems, 42, pp. 1944–1958.
  • 86. HAHN, G. J. y KUHN, H. (2012a) Value-based Performance and Risk Management in Supply Chains: A Robust Optimization Approach. International Journal of Production Economics, 139, pp. 135–144.
  • 87. HAHN, G. J. y KUHN, H. (2012b) Designing Decision Support Systems for Value based Management: A Survey and an Architecture. Decision Support Systems, 53, pp. 591–598.
  • 88. HALEH, H. y HAMIDI, A. (2011). A Fuzzy MCDM Model for Allocating Orders to Suppliers in a Supply Chain under Uncertainty over a Multi-period Time Horizon. Expert Systems with Applications, 38, pp. 9076–9083
  • 89. HALE, T. y MOBERG, C. R. (2005). Improving Supply Chain Disaster Preparedness: A Decision Process for Secure Site Location. International Journal of Physical Distribution & Logistics Management, 35, pp. 195–207.
  • 90. HALLIKAS, J., KARVONEN, I., PULKKINEN, U., VIROLAINEN, V. M. y TUOMINEN, M. (2004). Risk Management Processes in Supplier Networks. International Journal of Production Economics, 90, pp. 47–58.
  • 91. HALLIKAS, J., PUUMALAINEN, K., VESTERINEN, T. y VIROLAINEN, V. M. (2005). Risk-based Classification of Supplier Relationships. Journal of Purchasing & Supply Management, 11, pp. 72–82.
  • 92. HARLAND, C., BRENCHLEY, R. y WALKER, H. (2003). Risk in Supply Networks. Journal of Purchasing & Supply Management, 9, pp. 51–62.
  • 93. HE, Y. (2013). Sequential Price and Quantity Decisions under Supply and Demand Risks. International Journal of Production Economics, 141, pp. 541–551.
  • 94. HE, Y. y ZHANG, J. (2008) Random Yield Risk Sharing in a Two-level Supply Chain.” International Journal of Production Economics, 112, pp. 769–781.
  • 95. HISHAMUDDIN, H., SARKER, R. A. y ESSAM, D. (2013). A Recovery Model for a Two-echelon Serial Supply Chain with Consideration of Transportation Disruption. Computers & Industrial Engineering, 64, pp. 552–561.
  • 96. HO, W., DEY, P. K. y LOCKSTRÖM, M. (2011). Strategic Sourcing: A Combined QFD and AHP Approach in Manufacturing. Supply Chain Management: An International Journal, 16, pp. 446–461.
  • 97. HO, W., ZHENG, T., YILDIZ, H., y TALLURI, S. (2015). Supply chain risk management: a literature review. International Journal of Production Research, 1–39.
  • 98. HOFMANN, E. (2011). Natural Hedging as a Risk Prophylaxis and Supplier Financing Instrument in Automotive Supply Chains. Supply Chain Management: An International Journal, 16, pp. 128–141.
  • 99. HU, A. H., HSU, C. W., KUO, T. C. y WU, W. C. (2009). Risk evaluation of green components to hazardous substance using FMEA and FAHP. Expert Systems with Applications, 36(3 PART 2), pp. 7142–7147.
  • 100. HUANG, H. Y., CHOU, Y. C. y CHANG, S. (2009). A Dynamic System Model for Proactive Control of Dynamic Events in Full-load States of Manufacturing Chains. International Journal of Production Research, 47, pp. 2485–2506.
  • 101. HULT, G. T. M., CRAIGHEAD, C. W. y KETCHEN, D. J. JR. (2010) Risk Uncertainty and Supply Chain Decisions: A Real Options Perspective. Decision Sciences, 41, pp. 435–458.
  • 102. HUNG, K. T. y RYU, S. (2008). Changing Risk Preferences in Supply Chain Inventory Decisions. Production Planning & Control, 19, pp. 770–780.
  • 103. HUNG, S. J. (2011). Activity-based Divergent Supply Chain Planning for Competitive Advantage in the Risky Global Environment: A DEMATEL-ANP Fuzzy Goal Programming Approach. Expert Systems with Applications, 38, pp. 9053–9062.
  • 104. IAKOVOU, E., VLACHOS, D. y XANTHOPOULOS, A. (2010). A Stochastic Inventory Management Model for a Dual Sourcing Supply Chain with Disruptions. International Journal of Systems Science, 41, pp. 315–324.
  • 105. JACINTO, C. y SILVA, C. (2010). A semi-quantitative assessment of occupational risks using bowtie representation. Safety Science, 48(8), pp. 973-979.
  • 106. JAVIDI, M., ABDOLHAMIDZADEH, B., RENIERS, G. y RASHTCHIAN, D. (2015). A multivariable model for estimation of vapor cloud explosion occurrence possibility based on a Fuzzy logic approach for flammable materials. Journal of Loss Prevention in the Process Industries, 33, pp. 140–150.
  • 107. JEVGENI, S., EDUARD, S. y ROMAN, Z. (2015). Framework for Continuous Improvement of Production Processes and Product Throughput. Procedia Engineering, 100, pp. 511–519.
  • 108. JI, G. y ZHU, C. (2012) A Study on Emergency Supply Chain and Risk Based on Urgent Relief Service in Disasters. Systems Engineering Procedia, 5, pp. 313–325.
  • 109. JOHN, A., PARASKEVADAKIS, D., BURY, A., YANG, Z., RIAHI, R. y WANG, J. (2014). An integrated fuzzy risk assessment for seaport operations. Safety Science, 68, pp. 180–194.
  • 110. JOHNSON, N., ELLIOTT, D. y DRAKE, P. (2013) Exploring the Role of Social Capital in Facilitating Supply Chain Resilience. Supply Chain Management: An International Journal, 18, pp. 324–336.
  • 111. JONG, C. H., TAY, K. M. y LIM, C. P. (2013). Application of the fuzzy Failure Mode and Effect Analysis methodology to edible bird nest processing. Computers and Electronics in Agriculture, 96, pp. 90–108.
  • 112. JÜTTNER, U. y MAKLAN, S. (2011). Supply Chain Resilience in the Global Financial Crisis: An Empirical Study. Supply Chain Management: An International Journal, 16, pp. 246–259.
  • 113. KANG, J. H. y KIM, Y. D. (2012). Inventory Control in a Two-level Supply Chain with Risk Pooling Effect. International Journal of Production Economics, 135, pp. 116–124.
  • 114. KAYA, M. y ÖZER, Ö. (2009). Quality Risk in Outsourcing: Noncontractible Product Quality and Private Quality Cost Information. Naval Research Logistics, 56, pp. 669–685.
  • 115. KAYIS, B. y KARNINGSIH, P. D. (2012). A Knowledge-based System Tool for Assisting Manufacturing Organizations in Identifying Supply Chain Risks. Journal of Manufacturing Technology Management, 23, pp. 834–852.
  • 116. KENNÉ, J. P., DEJAX, P. y GHARBI, A. (2012). Production Planning of a Hybrid Manufacturing–Remanufacturing System under Uncertainty within a Closed-loop Supply Chain. International Journal of Production Economics, 135, pp. 81–93.
  • 117. KEREN, B. (2009). The Single-period Inventory Problem: Extension to Random Yield from the Perspective of the Supply Chain. Omega, 37, pp. 801–810.
  • 118. KERN, D., MOSER, R. HARTMANN, E. y MODER, M. (2012) Supply Risk Management: Model Development and Empirical Analysis. International Journal of Physical Distribution & Logistics Management, 42, pp. 60–82.
  • 119. KHAKZAD, N., KHAN, F. y AMYOTTE, P. (2012). Dynamic risk analysis using bow-tie approach. Reliability Engineering and System Safety, 104(1), pp. 36-44.
  • 120. KHAKZAD, N., KHAN, F. y AMYOTTE, P. (2013). Dynamic safety analysis of process systems by mapping bow-tie into Bayesian network. Process Safety and Environmental Protection, 91(1), pp. 46-53.
  • 121. KHAN, O., CHRISTOPHER, M. y BURNES, B. (2008). The Impact of Product Design on Supply Chain Risk: A Case Study. International Journal of Physical Distribution & Logistics Management, 38, pp. 412–432.
  • 122. KHILWANI, N., TIWARI, M. K. y SABUNCUOGLU, I. (2011). Hybrid Petri-nets for Modelling and Performance Evaluation of Supply Chains. International Journal of Production Research, 49, pp. 4627–4656.
  • 123. KIM, S. H., FOWLER, J. W. SHUNK, D. L. y PFUND, M. E. (2012). Improving the Push–Pull Strategy in a Serial Supply Chain by a Hybrid Push– Pull Control with Multiple Pulling Points. International Journal of Production Research, 50, pp 5651–5668.
  • 124. KIM, W. S. (2013). A Supply Chain Contract with Flexibility as a Risk-sharing Mechanism for Demand Forecasting. International Journal of Systems Science, 44, pp. 1134–1149.
  • 125. KLEINDORFER, P. R., y SAAD, G. H. (2005). Managing Disruption Risks in Supply Chains. Production and Operations Management, 14, pp. 53–68.
  • 126. KNEMEYER, A. M., ZINN, W. y EROGLU, C. (2009). Proactive Planning for Catastrophic Events in Supply Chains. Journal of Operations Management, 27, pp. 141–153.
  • 127. KOLICH, M. (2014). Using Failure Mode and Effects Analysis to design a comfortable automotive driver seat. Applied Ergonomics, 45(4), pp.1087–1096.
  • 128. KULL, T. y CLOSS, D. (2008). The Risk of Second-tier Supplier Failures in Serial Supply Chains: Implications for Order Policies and Distributor Autonomy. European Journal of Operational Research, 186, pp. 1158–1174.
  • 129. KULL, T. J. y TALLURI, S. (2008). A Supply Risk Reduction Model Using Integrated Multicriteria Decision Making. IEEE Transactions on Engineering Management, 55, pp. 409–419.
  • 130. KUMAR, M., VRAT, P. y SHANKAR, R. (2006). A Fuzzy Programming Approach for Vendor Selection Problem in a Supply Chain. International Journal of Production Economics, 101, pp. 273–285.
  • 131. KUMAR, S. y HAVEY, T. (2013). Before and after Disaster Strikes: A Relief Supply Chain Decision Support Framework. International Journal of Pro-duction Economics, 145, pp. 613–629.
  • 132. KUMAR, S., KUMAR, P. y KUMAR, B. (2015). Risk analysis in green supply chain using fuzzy AHP approach: A case study. Resources, Conservation and Recycling, 104, pp. 375-390
  • 133. KUMAR, S. K. y TIWARI, M. K. (2013). Supply Chain System Design Integrated with Risk Pooling. Computers & Industrial Engineering, 64, pp. 580–588.
  • 134. KUMAR, S. K., TIWARI, M. K. y BABICEANU, R. F. (2010). Minimization of Supply Chain Cost with Embedded Risk Using Computational Intelligence Approaches. International Journal of Production Research, 48, pp. 3717–3739.
  • 135. KUTLU, A. C. y EKMEKÇIOG ˘LU, M. (2012). Fuzzy failure modes and effects analysis by using fuzzy TOPSIS-based fuzzy AHP. Expert Systems with Applications, 39(1), pp. 61–67.
  • 136. LAEEQUDDIN, M., SARDANA, G. D. SAHAY, B. S. WAHEED, K. A. y SAHAY, V. (2009) Supply Chain Partners’ Trust Building Process through Risk Evaluation: The Perspectives of UAE Packaged Food Industry. Supply Chain Management: An International Journal,14, pp. 280–290.
  • 137. LAVASTRE, O., GUNASEKARAN, A. y SPALANZANI, A. (2012). Supply Chain Risk Management in French Companies. Decision Support Systems, 52, pp. 828–838.
  • 138. LE, H. Q., S. ARCHINT, NGUYEN, H. X. y ARCH-INT, N. (2013). Association Rule Hiding in Risk Management for Retail Supply Chain Collaboration. Computers in Industry, 64, pp.776–784.
  • 139. LEAT, P. y REVOREDO-GIHA, C. (2013). Risk and Resilience in Agri-food Supply Chains: The Case of the ASDA Pork Link Supply Chain in Scotland. Supply Chain Management: An International Journal, 18, pp. 219–231.
  • 140. LEI, D., LI, J. y LIU, Z. (2012). Supply Chain Contracts under Demand and Cost Disruptions with Asymmetric Information. International Journal of Production Economics, 139, pp. 116–126.
  • 141. LEJEUNE, M. A. (2008). Preprocessing Techniques and Column Generation Algorithms for Stochastically Efficient Demand. Journal of the Operational Research Society, 59, pp. 1239–1252.
  • 142. LI, J., WANG, S. y CHENG, T. C. E. (2010). Competition and Cooperation in a Single-retailer Two-supplier Supply Chain with Supply Disruption. International Journal of Production Economics, 124, pp. 137–150.
  • 143. LI, Q. (2007). Risk, Risk Aversion and the Optimal Time to Produce. IIE Transactions, 39, pp. 145–158.
  • 144. LIN, Y. y ZHOU, L. (2011). The Impacts of Product Design Changes on Supply Chain Risk: A Case Study. International Journal of Physical Distribution & Logistics Management, 41, pp. 162–186.
  • 145. LINDHE, A., ROSÉN, L., NORBERG, T. y BERGSTEDT, O. (2009). Fault tree analysis for integrated and probabilistic risk analysis of drinking water systems. Water Research, 43(6), pp 1641–1653.
  • 146. LIU, H. (2009). The extension of fuzzy QFD: From product planning to part deployment. Expert Systems with Applications, 36(8), pp. 11131-11144
  • 147. LIU, H.-C., LIU, L., BIAN, Q.-H., LIN, Q.-L., DONG, N. y XU, P.-C. (2011). Failure mode and effects analysis using fuzzy evidential reasoning approach and grey theory. Expert Systems with Applications, 38(4), pp. 4403–4415.
  • 148. LIU, Z. y CRUZ, J. M. (2012). Supply Chain Networks with Corporate Financial Risks and Trade Credits under Economic Uncertainty. International Journal of Production Economics, 137, pp. 55–67.
  • 149. LIU, Z. y NAGURNEY, A. (2011). Supply Chain Outsourcing under Exchange Rate Risk and Competition. Omega, 39, pp. 539–549.
  • 150. LOCKAMY III, A. y MCCORMACK, K. (2010). Analysing Risks in Supply Networks to Facilitate Outsourcing Decisions. International Journal of Production Research, 48, pp. 593–611.
  • 151. LUNDIN, J. F. (2012). Redesigning a Closedloop Supply Chain Exposed to Risks. International Journal of Production Economics, 140, pp. 596–603.
  • 152. MAK, H. Y. y SHEN, Z. J. M. (2012). Risk Diversification and Risk Pooling in Supply Chain Design. IIE Transactions, 44, pp. 603–621.
  • 153. MAKAJIC-NIKOLIC, D. et al. (2015). The fault tree analysis of infectious medical waste management. Journal of Cleaner Production, pp. 1-9.
  • 154. MANUJ, I. y MENTZER. J. T. (2008). Global Supply Chain Risk Management Strategies. International Journal of Physical Distribution & Logistics Management, 38, pp. 192–223.
  • 155. MARKOWSKI, A. y KOTUNIA, A. (2011). Bowtie model in layer of protection analysis. Process Safety and Environmental Protection, 89(4), pp. 205-213.
  • 156. MEENA, P. L. y SARMAH, S. P. (2013). Multiple Sourcing under Supplier Failure Risk and Quantity Discount: A Genetic Algorithm Approach. Transportation Research Part E: Logistics and Transportation Review, 50, pp. 84–97.
  • 157. MEENA, P. L., SARMAH, S. P. y SARKAR, A. (2011). Sourcing Decisions under Risks of Catastrophic Event Disruptions. Transportation Research Part E: Logistics and Transportation Review, 47, pp.1058–1074.
  • 158. MEEL, A., O’NEILL, L., LEVIN, J., SEIDER, W., OKTEM, U. y KEREN, N. (2007). Operational risk assessment of chemical industries by exploiting accident databases. Journal of Loss Prevention in the Process Industries, 20 (2), pp. 113-127.
  • 159. MOEINZADEH, P.B. y HAJFATHALIHA, A. (2009). A combined fuzzy decision making approach to supply chain risk assessment. World Academy of Science, Engineering and Technology, 60, pp.519–535.
  • 160. MOKHTARI, K., REN, J., ROBERTS, C. y WANG, J. (2011). Application of a generic bow-tie based risk analysis framework on risk management of sea ports and offshore terminals. Journal of Hazardous Materials, 192(2), pp. 465–475.
  • 161. NAKASHIMA, K. y GUPTA, S. M. (2012). A Study on the Risk Management of Multi Kanban System in a Closed Loop Supply Chain. International Journal of Production Economics, 139, pp. 65–68.
  • 162. NARASIMHAN, R. y TALLURI, S. (2009). Perspectives on risk management in supply chains. Journal Operation Management, 27 (2), pp. 114–118.
  • 163. NEIGER, D., K. ROTARU y CHURILOV, L. (2009). Supply Chain Risk Identification with Value-focused Process Engineering. Journal of Operations Management, 27, pp. 154–168.
  • 164. NORRMAN, A. y JANSSON, U. (2004). Ericsson’s Proactive Supply Chain Risk Management Approach after a Serious Sub-supplier Accident. International Journal of Physical Distribution & Logistics Management, 34, pp. 434–456.
  • 165. OEHMEN, J., ZIEGENBEIN, A., ALARD, R. y SCHÖNSLEBEN, P. (2009). System-oriented Supply Chain Risk Management. Production Planning & Control, 20, pp 343–361.
  • 166. OKE, A. y GOPALAKRISHNAN, M. (2009). Managing Disruptions in Supply Chains: A Case Study of a Retail Supply Chain. International Journal of Production Economics, 118, pp.168–174.
  • 167. OLSON, D. L. y WU, D. D. (2010). A Review of Enterprise Risk Management in Supply Chain. Kybernetes, 39, pp. 694–706.
  • 168. OLSON, D. L. y WU, D. (2011). Risk Management Models for Supply Chain: A Scenario Analysis of Outsourcing to China. Supply Chain Management: An International Journal, 16, pp. 401–408.
  • 169. PARK, S., LEE, T. E. y SUNG, C. S. (2010). A Three-level Supply Chain Network Design Model with Risk-pooling and Lead times. Transportation Research Part E: Logistics and Transportation Review, 46, pp. 563–581.
  • 170. PECK, H. (2005). Drivers of Supply Chain Vulnerability: An Integrated Framework. International Journal of Physical Distribution & Logistics Management,35, pp. 210–232.
  • 171. PETTIT, T. J., CROXTON, K. L. y FIKSEL, J. (2013). Ensuring Supply Chain Resilience: Development and Implementation of an Assessment Tool. Journal of Business Logistics, 34, pp. 46–76.
  • 172. PILLAY, A., y WANG, J. (2003). Modified failure mode and effects analysis using approximate reasoning. Reliability Engineering & System Safety, 79(1), pp. 69–85
  • 173. POOJARI, C. A., LUCAS, C. y MITRA, G. (2008). Robust Solutions and Risk Measures for a Supply Chain Planning Problem under Uncertainty. Journal of the Operational Research Society 59, pp. 2–12.
  • 174. PUENTE, J., PINO, R., PRIORE, P. y DE LA FUENTE, D. (2002). A decision support system for applying failure mode and effects analysis. International Journal of Quality & Reliability Management, 19(2), pp. 137–150.
  • 175. PUJAWAN, I. N. y GERALDIN, L. H. (2009). House of Risk: A Model for Proactive Supply Chain Risk Management.” Business Process Management Journal, 15, pp. 953–967.
  • 176. QIANG, P. y NAGURNEY, A. (2012). A bi-criteria Indicator to Assess Supply Chain Network Performance for Critical Needs under Capacity and Demand Disruptions. Transportation Research Part A, 46, pp. 801–812.
  • 177. RADKE, A. M. y TSENG, M. M. (2012). A Risk Management-based Approach for Inventory Planning of Engineering-to-order Production. CIRP Annals-Manufacturing Technology, 61, pp. 387–390.
  • 178. RAGHAVAN, N. R. S. y MISHRA, V. K. (2011). Short-term Financing in a Cash-constrained Supply Chain. International Journal of Production Economics, 134, pp. 407–412.
  • 179. RAMAKRISHNAN, M. (2016). Unavailability estimation of shutdown system of a fast reactor by Monte Carlo simulation. Annals of Nuclear Energy, 90, pp. 264–274.
  • 180. RAO, U. S., SWAMINATHAN, J. M. y ZHANG, J. (2005). Demand and Production Management with Uniform Guaranteed Lead Time. Production and Operations Management, 14, pp. 400–412.
  • 181. RAVINDRAN, A. R., BILSEL, R. U., WADHWA, V. y YANG, T. (2010). Risk Adjusted Multicriteria Supplier Selection Models with Applications. International Journal of Production Research, 48, pp 405–424.
  • 182. REINER, G. y FICHTINGER, J. (2009). Demand Forecasting for Supply Processes in Consideration of Pricing and Market Information. International Journal of Production Economics, 118, pp.55–62.
  • 183. RITCHIE, B. y BRINDLEY, C. (2007). An Emergent Framework for Supply Chain Risk Management and Performance Measurement. Journal of the Operational Research Society, 58, pp. 1398–1411.
  • 184. ROHMAH, D. U. M., DANIA, W. A. P. y DEWI, I. A. (2015). Risk Measurement of Supply Chain Organic Rice Product Using Fuzzy Failure Mode Effect Analysis in MUTOS Seloliman Trawas Mojokerto. Agriculture and Agricultural Science Procedia, 3, pp. 108–113.
  • 185. RUIZ-TORRES, A. J. y MAHMOODI, F. (2007). The Optimal Number of Suppliers Considering the Costs of Individual Supplier Failures, Omega, 35, pp.104–115.
  • 186. RUIZ-TORRES, A. J., MAHMOODI, F. y ZENG, A. Z. (2013). Supplier Selection Model with Contingency Planning for Supplier Failures. Computers & Industrial Engineering, 66, pp. 374–382.
  • 187. SAMVEDI, A., JAIN, V. y CHAN, F. T. S. (2013). Quantifying Risks in a Supply Chain through Integration of Fuzzy AHP and Fuzzy TOPSIS. International Journal of Production Research, 51, pp. 2433–2442.
  • 188. SANKAR, N. R. y PRABHU, B. S. (2001). Modified approach for prioritization of failures in a system failure mode and effects analysis. International Journal of Quality & Reliability Management, 18(3), pp. 324–336.
  • 189. SAWIK, T. (2013a). Integrated Selection of Suppliers and Scheduling of Customer Orders in the Presence of Supply Chain Disruption Risks. International Journal of Production Research, 51, pp. 7006–7022.
  • 190. SAWIK, T. (2013b). Selection of Resilient Supply Portfolio under Disruption Risks. Omega, 41, pp. 259–269.
  • 191. SAYED, H. E., GABBAR, H. A. y MIYAZAKI. S. (2009). A Hybrid Statistical Genetic-based Demand Forecasting Expert System. Expert Systems with Applications, 36, pp. 11662–11670.
  • 192. SCHMITT, A. J. (2011). Strategies for Customer Service Level Protection under Multi-echelon Supply Chain Disruption Risk. Transportation Research Part B: Methodological, 45, pp. 1266–1283.
  • 193. SCHMITT, A. J. y SINGH, M. (2012). A Quantitative Analysis of Disruption Risk in a Multi-echelon Supply Chain. International Journal of Production Economics, 139, pp. 22–32.
  • 194. SCHMITT, A. J., SNYDER, L. V. y SHEN. Z. J. M. (2010). Inventory Systems with Stochastic Demand and Supply: Properties and Approximations. European Journal of Operational Research, 206, pp. 313–328.
  • 195. SCHOENHERR, T., TUMMALA, V. M. R. y HARRISON, T. P. (2008). Assessing Supply Chain Risks with the Analytic Hierarchy Process: Providing Decision Support for the Offshoring Decision by a US Manufacturing Company. Journal of Purchasing & Supply Management, 14, pp. 100–111.
  • 196. SHAHIAR, A., SADIQ, R., y TESFAMARIAM, S. (2012). Risk analysis for oil and gas pipelines: a sustainability assessment approach using fuzzy based bow-tie analysis. Journal of Loss Prevention in the Process Industries, 25(3), pp. 505-523.
  • 197. SHARMA, R. K., KUMAR, D., y KUMAR, P. (2005). Systematic failure mode effect analysis (FMEA) using fuzzy linguistic modelling. International Journal of Quality & Reliability Management, 22(9), pp. 986–1004.
  • 198. SHERWIN, M.D. (2016). Proactive cost-effective identification and mitigation of supply delay risks in a low volume high value supply chain using faulttree analysis. International Journal of Production Economics, 175, pp. 153-163
  • 199. SHI, Y., F. WU, L. K. CHU, SCULLI, D. y XU, Y. H. (2011). A Portfolio Approach to Managing Procurement Risk Using Multi-stage Stochastic Programming. Journal of the Operational Research Society, 62, pp. 1958–1970.
  • 200. SINHA, P. R., WHITMAN, L. E. y MALZAHN, D. (2004). Methodology to Mitigate Supplier Risk in an Aerospace Supply Chain. Supply Chain Management: An International Journal, 9, pp. 154–168.
  • 201. SKIPPER, J. B., y HANNA, J. B. (2009). Minimizing Supply Chain Disruption Risk through Enhanced Flexibility. International Journal of Physical Distribution & Logistics Management, 39, pp. 404–427.
  • 202. SMAROS, J., LEHTONEN, J. M. APPELQVIST, P. y HOLMSTRÖM, J. (2003). The Impact of Increasing Demand Visibility on Production and Inventory Control Efficiency. International Journal of Physical Distribution & Logistics Management, 33, pp. 336–354.
  • 203. SMITH, G. E., WATSON, K. J., BAKER, W. H. y POKORSKI, J. A. (2007). A Critical Balance: Collaboration and Security in the IT-enabled Supply Chain. International Journal of Production Research, 45, pp. 2595–2613.
  • 204. SNYDER, L. V., DASKIN, M. S. y TEO, C. P. (2007). The Stochastic Location Model with Risk Pooling. European Journal of Operational Research, 179, pp. 1221–1238.
  • 205. SODHI, M. S. (2005). Managing Demand Risk in Tactical Supply Chain Planning for a Global Consumer Electronics Company. Production and Operations Management, 14, pp. 69–79.
  • 206. SODHI, M. S., SON, B. G. y TANG, C. S. (2012). Researchers’ Perspectives on Supply Chain Risk Management. Production and Operations Management, 21, pp. 1–13.
  • 207. SODHI, M. S. y TANG, C. S. (2009). Modeling Supply-chain Planning under Demand Uncertainty Using Stochastic Programming: A Survey Motivated by Asset–Liability Management. International Journal of Production Economics, 121, pp. 728–738.
  • 208. SON, J. Y. y ORCHARD, R. K. (2013). Effectiveness of Policies for Mitigating Supply Disruptions. International Journal of Physical Distribution & Logistics Management, 43, pp. 684–706.
  • 209. SPEIER, C., WHIPPLE, J. M., CLOSS, D. J. y VOSS, M. D. (2011). Global Supply Chain Design Considerations: Mitigating Product Safety and Security Risks. Journal of Operations Management, 29, pp. 721–736.
  • 210. SUCKY, E. (2009). The Bullwhip Effect in Supply Chains – An Overestimated Problem?” International Journal of Production Economics, 118, pp. 311–322.
  • 211. SUN, J., MATSUI, M. y YIN, Y. (2012). Supplier Risk Management: An Economic Model of P-chart Considered Due-date and Quality Risks. International Journal of Production Economics 139, pp. 58–64.
  • 212. TALLURI, S., CETIN, K. y GARDNER, A. J. (2004). Integrating Demand and Supply Variability into Safety Stock Evaluations. International Journal of Physical Distribution & Logistics Management, 34, pp. 62–69.
  • 213. TALLURI, S., KULL, T. J., YILDIZ, H. y YOON, J. (2013). Assessing the Efficiency of Risk Mitigation Strategies in Supply Chains. Journal of Business Logistics, 34, pp. 253–269.
  • 214. TALLURI, S., y NARASIMHAN, R. (2003). Vendor Evaluation with Performance Variability: A Max– Min Approach. European Journal of Operational Research, 146, pp. 543–552 . 215. TALLURI, S., NARASIMHAN, R. y CHUNG, W. (2010). Manufacturer Cooperation in Supplier Development under Risk. European Journal of Operational Research, 207, pp. 165–173.
  • 216. TALLURI, S., NARASIMHAN, R. y NAIR, A. (2006). Vendor Performance with Supply Risk: A Chance-constrained DEA Approach. International Journal of Production Economics, 100, pp. 212–222.
  • 217. TAN, Q., CHEN, G., ZHANG, L., FU, J. y LI, Z. (2013). Dynamic accident modeling for high-sulfur natural gas gathering station. Process Safety and Environmental Protection, 92(6), pp. 565–576.
  • 218. TANG, C. S. y TOMLIN, B. (2008). The Power of Flexibility for Mitigating Supply Chain Risks. International Journal of Production Economics, 116, pp. 12–27.
  • 219. TANG, O. y MUSA, S. N. (2011). Identifying Risk Issues and Research Advancements in Supply Chain Risk Management. International Journal of Production Economics, 133, pp. 25–34.
  • 220. TANG, O., MUSA, S. N. y LI, J. (2012). Dynamic Pricing in the Newsvendor Problem with Yield Risks. International Journal of Production Economics, 139, pp. 127–134. 221. TAPIERO, C. S. (2007). Consumers Risk and Quality Control in a Collaborative Supply Chain. European Journal of Operational Research, 182, pp. 683–694.
  • 222. TAY, K. M. y LIM, C. P. (2006). Fuzzy FMEA with a guided rules reduction system for prioritization of failures. International Journal of Quality & Reliability Management, 23(8), pp. 1047–1066.
  • 223. THUN, J. y HOENIG, D. (2011). An Empirical Analysis of Supply Chain Risk Management in the German Automotive Industry. International Journal of Production Economics, 131, pp. 242–249.
  • 224. TOMLIN, B. (2006). On the Value of Mitigation and Contingency Strategies for Managing Supply Chain Disruption Risks. Management Science, 52, pp. 639–657.
  • 225. TOMLIN, B. (2009). Disruption-management Strategies for Short Life-cycle Products. Naval Research Logistics, 56, pp 318–347.
  • 226. TRANFIELD, D., DENYER, D. y SMART, P. (2003). Towards a methodology for developing evidence-informed management knowledge by means of systematic review. British Journal of Management 14 (3), pp. 207–222.
  • 227. TRKMAN, P. y MCCORMACK, K. (2009). Supply Chain Risk in Turbulent Environments – A Conceptual Model for Managing Supply Chain Network Risk. International Journal of Production Economics, 119, pp. 247–258.
  • 228. TSAI, C. Y. (2008). On Supply Chain Cash Flow Risks. Decision Support Systems, 44, pp. 1031–1042.
  • 229. TSAI, M. C., LIAO, C. H. y HAN, C. S. (2008). Risk Perception on Logistics Outsourcing of Retail Chains: Model Development and Empirical Verification in Taiwan. Supply Chain Management: An International Journal, 13, pp. 415–424.
  • 230. TSE, Y. K., y TAN, K. H. (2011). Managing Product Quality Risk in a Multi-tier Global Supply Chain. International Journal of Production Research, 49, pp. 139–158.
  • 231. TUMMALA, R. y SCHOENHERR, T. (2011). Assessing and Managing Risks Using the Supply Chain Risk Management Process (SCRMP). Supply Chain Management: An International Journal, 16, pp. 474–483.
  • 232. TUNCEL, G. y ALPAN, G. (2010). Risk Assessment and Management for Supply Chain Networks: A Case Study. Computers in Industry, 61, pp. 250–259.
  • 233. VAN DELFT, C. y VIAL, J. P. (2004). A practical implementation of stochastic programming: An application to the evaluation of option contracts in supply chains. Automatica, 40(5), pp. 743–756.
  • 234. VEDEL, M. y ELLEGAARD, C. (2013). Supply Risk Management Functions of Sourcing Intermediaries: An Investigation of the Clothing Industry. Supply Chain Management: An International Journal, 18, pp. 509–522.
  • 235. VISWANADHAM, N. y SAMVEDI, A. (2013). Supplier Selection Based on Supply Chain Ecosystem, Performance and Risk Criteria. International Journal of Production Research, 51, pp. 6484–6498.
  • 236. WAGNER, S. M. y BODE, C. (2008). An Empirical Examination of Supply Chain Performance Along Several Dimensions of Risk. Journal of Business Logistics, 29, pp. 307–325.
  • 237. WAGNER, S. M. y NESHAT, N. (2010). Assessing the Vulnerability of Supply Chains Using Graph Theory. International Journal of Production Economics, 126, pp. 121–129.
  • 238. WAGNER, S. M. y SILVEIRA-CAMARGOS, V. (2012). Managing Risks in Just-in-sequence Supply Networks: Exploratory Evidence from Automakers. IEEE Transactions on Engineering Management, 59, pp. 52–64.
  • 239. WAKOLBINGER, T. y CRUZ, J. M. (2011). Supply Chain Disruption Risk Management through Strategic Information Acquisition and Sharing and Risk-sharing Contracts. International Journal of Production Research, 49, pp. 4063–4084.
  • 240. WANG, X., H. K., CHAN, R. W. YEE, Y. y DIAZ-RAINEY, I. (2012). A Two-stage Fuzzy-AHP Model for Risk Assessment of Implementing Green Initiatives in the Fashion Supply Chain. International Journal of Production Economics, 135, pp. 595–606.
  • 241. WANG, Y. M., CHIN, K. S., POON, G. K. K. y YANG, J. B. (2009). Risk evaluation in failure mode and effects analysis using fuzzy weighted geometric mean. Expert Systems with Applications, 36(2), pp. 1195–1207.
  • 242. WANG, Y., GILLAND, W. y TOMLIN, B. (2011). Regulatory Trade Risk and Supply Chain Strategy. Production and Operations Management, 20, pp. 522–540.
  • 243. WIENGARTEN, F., PAGELL, M. y FYNES, B. (2013). The Importance of Contextual Factors in the Success of Outsourcing Contracts in the Supply Chain Environment: The Role of Risk and Complementary Practices. Supply Chain Management: An International Journal, 18, pp. 630–643.
  • 244. WU, D. y OLSON, D. L. (2008). Supply Chain Risk, Simulation, and Vendor Selection. International Journal of Production Economics, 114, pp. 646–655.
  • 245. WU, D. D. y OLSON, D. (2010). Enterprise Risk Management: A DEA VaR Approach in Vendor Selection. International Journal of Production Research, 48, pp. 4919–4932.
  • 246. WU, D., WU, D. D., ZHANG, Y. y OLSON, D. L. (2013). Supply Chain Outsourcing Risk Using an Integrated Stochastic-fuzzy Optimization Approach. Information Sciences, 235, pp. 242–258.
  • 247. WU, D. D., ZHANG, Y., WU, D. y OLSON, D. L. (2010). Fuzzy Multi-objective Programming for Supplier Selection and Risk Modeling: A Possibility Approach. European Journal of Operational Research, 200, pp. 774–787.
  • 248. WU, T., BLACKHURST, J. y CHIDAMBARAM, V. (2006). A Model for Inbound Supply Risk Analysis. Computers in Industry, 57, pp. 350– 365.
  • 249. WU, T., BLACKHURST, J. y O’GRADY, P. (2007). Methodology for Supply Chain Disruption Analysis. International Journal of Production Research, 45, pp. 1665–1682.
  • 250. XANTHOPOULOS, A., VLACHOS, D. y IAKOVOU, E. (2012). Optimal Newsvendor Policies for Dual-sourcing Supply Chains: A Disruption Risk Management Framework. Computers & Operations Research, 39, pp. 350–357.
  • 251. XIA, D. y CHEN, B. (2011). A Comprehensive Decision-making Model for Risk Management of Supply Chain. Expert Systems with Applications, 38, pp. 4957–4966.
  • 252. XIA, Y., RAMACHANDRAN, K. y GURNANI, H. (2011). Sharing Demand and Supply Risk in a Supply Chain. IIE Transactions, 43, pp. 451–469.
  • 253. XIAO, T. y YANG, D. (2008). Price and Service Competition of Supply Chains with Risk-averse Retailers under Demand Uncertainty. International Journal of Production Economics, 114, pp. 187–200.
  • 254. XIAO, T. y YANG, D. (2009). Risk Sharing and Information Revelation Mechanism of a One-manufacturer and One-retailer Supply Chain Facing an Integrated Competitor. European Journal of Operational Research, 196, pp. 1076–1085.
  • 255. YANG, M., KHAN, F. y LYE, L. (2013). Precursor-based hierarchical Bayesian approach for rare event frequency estimation: a case of oil spill accidents. Process Safety and Environmental Protection, 91(5), pp. 333-342.
  • 256. YANG, Z. B., AYDIN, G., BABICH, V. y BEIL, D. R. (2009). Supply Disruptions, Asymmetric Information, and a Backup Production Option. Management Science, 55, pp. 192–209.
  • 257. YANG, Z., BONSALL, S. y WANG, J. (2008). Fuzzy rule-based Bayesian reasoning approach for prioritization of failures in FMEA. IEEE Transactions on Reliability, 57(3), 517–528.
  • 258. YANG, B. y YANG, Y. (2010). Postponement in supply chain risk management: a complexity perspective. International Journal of Production Research, 48 (7), pp. 1901–1912
  • 259. YU, H., ZENG, A. Z. y Zhao, L. (2009). Single or Dual Sourcing: Decision-making in the Presence of Supply Chain Disruption Risks. Omega 37,pp. 788–800.
  • 260. ZHANG, K., CHAI, Y. YANG, S. X. y WENG, D. (2011). Pre-warning Analysis and Application in Traceability Systems for Food Production Supply Chains. Expert Systems with Applications, 38, pp. 2500–2507.
  • 261. ZIRILLI, T. (2015). Die crack failure mechanism investigations depending on the time of failure. Microelectronics Reliability 55(9-10), pp. 1600-1606.
  • 262. ZSIDISIN, G. A. y ELLRAM, L. M. (2003). An Agency Theory Investigation of Supply Risk Management. The Journal of Supply Chain Management, 39, pp. 15–27.
  • 263. ZSIDISIN, G. A., ELLRAM, L. M. CARTER, J. R y CAVINATO, J. L. (2004). An Analysis of Supply Risk Assessment Techniques. International Journal of Physical Distribution & Logistics Management, 34, pp. 397–413.
  • 264. ZSIDISIN, G. A., MELNYK, S. A. y RAGATZ, G. L. (2005). An Institutional Theory Perspective of Business Continuity Planning for Purchasing and Supply Management. International Journal of Production Research, 43 (16), pp. 3401–3420.
  • 265. ZSIDISIN, G. A. y SMITH, M. E. (2005). Managing Supply Risk with Early Supplier Involvement: A Case Study and Research Propositions. The Journal of Supply Chain Management, 41, pp. 44–57
Fonte de datos: Dialnet