Publicaciones (68) Publicaciones en las que ha participado algún/a investigador/a

2024

  1. Experimental Study on Styrene–Butadiene–Styrene-Modified Binders and Fly Ash Micro-Filler Contributions for Implementation in Porous Asphalt Mixes

    Sustainability (Switzerland), Vol. 16, Núm. 3

  2. Flash thermography to detect and evaluate impacts in polycarbonate parts produced by additive manufacturing

    NDT and E International, Vol. 146

  3. Low velocity impact response of Automated Fiber Placement Advanced Placed Ply composites

    Composites Science and Technology, Vol. 253

  4. Mapping and prospective of additive manufacturing in the context of Industry 4.0 and 5.0

    Rapid Prototyping Journal, Vol. 30, Núm. 7, pp. 1393-1410

  5. Raising awareness of the important role of engineering in sustainable development

    Heliyon, Vol. 10, Núm. 1

  6. Rheological behaviour of modified binders for different loading conditions and temperatures: A case of using pig tallow and crumb rubber from end–of–life tyres

    Results in Engineering, Vol. 23

  7. Spatial Models of Solar and Terrestrial Radiation Budgets and Machine Learning: A Review †

    Remote Sensing, Vol. 16, Núm. 16

  8. Surrogate metamodels from digital image correlation for testing high-performance composite vessels

    Heliyon, Vol. 10, Núm. 8

  9. Urban Regeneration Assessment in Castilla and León (Spain): A Comparative Study of Proposals in Homogeneous Residential Neighborhoods Built Up during Developmentalism

    Sustainability (Switzerland), Vol. 16, Núm. 14

2023

  1. A Comparative Study of the Effect of Moisture Susceptibility on Polyethylene Terephthalate–Modified Asphalt Mixes under Different Regulatory Procedures

    Sustainability (Switzerland), Vol. 15, Núm. 19

  2. Análisis del comportamiento reológico de la interfaz filler-ligante de másticos bituminosos con cenizas volantes

    XV Congreso de Ingeniería del Transporte (15º. La Laguna. 2023) (Universidad de La Laguna), pp. 1641-1652

  3. Automatic wear detection on normalized gears made by additive manufacturing from dense 3d point clouds

    Advances in Science and Technology

  4. Estudio experimental sobre la incorporación de la fracción mixta del reciclaje de plástico como reemplazo parcial del ligante en mezclas asfálticas

    XV Congreso de Ingeniería del Transporte (15º. La Laguna. 2023) (Universidad de La Laguna), pp. 1630-1640

  5. Experimental Study on Mechanical Properties of Hemp Fibers Influenced by Various Parameters

    Sustainability (Switzerland), Vol. 15, Núm. 12

  6. Finite Element Analysis of the Influence of Chamfer Hub Geometry on the Stress Concentrations of Shrink Fits

    Applied Sciences (Switzerland), Vol. 13, Núm. 6

  7. Impact response of automated fibre placement advanced placed ply composites

    ICCM International Conferences on Composite Materials

  8. Influence of the Friction Coefficient on the Stress Distributions and Contact Pressure in Press-Fits via Finite Element Analysis

    Lubricants, Vol. 11, Núm. 11

  9. Low temperature growth of nanocrystalline diamond: Insight thermal property

    Diamond and Related Materials, Vol. 137

  10. Prospective in additive manufacturing based on r-meta-analysis and bibliometric study

    Advances in Science and Technology

  11. Rheological analyses of binders modified with triple combinations of Crumb-Rubber, Sasobit and Styrene-Butadiene-Styrene

    Case Studies in Construction Materials, Vol. 19