Publicacions en què col·labora amb Pablo Zapico García (17)

2024

  1. Additive Manufacturing of Ceramic Reference Spheres by Stereolithography (SLA)

    Applied Sciences (Switzerland), Vol. 14, Núm. 17

  2. Laser Triangulation Sensors Performance in Scanning Different Materials and Finishes

    Sensors, Vol. 24, Núm. 8

2023

  1. Characterisation of the Performance of a Structured Light Digitising Sensor by Using Different Materials and Surface Finishes

    Key Engineering Materials (Trans Tech Publications Ltd), pp. 151-159

  2. Influence of Post-Processing on the Properties of Multi-Material Parts Obtained by Material Projection AM

    Polymers, Vol. 15, Núm. 9

2022

  1. Influence of 17-4 PH stainless steel powder recycling on properties of SLM additive manufactured parts

    Journal of Materials Research and Technology, Vol. 16, pp. 1647-1658

  2. Novel post-processing procedure to enhance casting molds manufactured by binder jetting AM

    Additive Manufacturing, Vol. 59

  3. Proposal of design rules for improving the accuracy of selective laser melting (SLM) manufacturing using benchmarks parts

    Rapid Prototyping Journal, Vol. 28, Núm. 6, pp. 1129-1143

2021

  1. Evaluation of Mechanical Properties of FDM Components Reinforced with Fibre

    Manufacturing Engineering Society International Conference, MESIC 9: Gijόn, 2021, Spain, June 23-24-25

2020

  1. Analysis of post-processing influence on the geometrical and dimensional accuracy of selective laser melting parts

    Rapid Prototyping Journal, Vol. 26, Núm. 10, pp. 1713-1722

  2. Characterisation of 17-4PH metallic powder recycling to optimise the performance of the selective laser melting process

    Journal of Materials Research and Technology, Vol. 9, Núm. 2, pp. 1273-1285

2019

  1. Analysis of Geometric and Dimensional Stability Over Time of Printed Parts by CJP Additive Technique

    Lecture Notes in Engineering and Computer Science

  2. Dimensional accuracy analysis of Direct Metal Printing machine focusing on roller positioning errors

    Procedia Manufacturing

  3. Improvement Surface Quality of SLM Parts by means of the Combination of Different Scanning Strategies

    Lecture Notes in Engineering and Computer Science

  4. Influence of the scanning strategy parameters upon the quality of the SLM parts

    Procedia Manufacturing

2018

  1. Caso de estudio en el procedimiento de un grupo de estudiantes cuando se aplica evaluación formativa en diferentes materias de un grado de Ingeniería

    XXVI Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas: libro de actas

  2. Influence of laser energy in the surface quality of parts manufactured by selective laser melting

    Annals of DAAAM and Proceedings of the International DAAAM Symposium

2017

  1. Metrological evaluation of Structured Light 3D scanning system with an optical feature-based gauge

    Procedia Manufacturing, Vol. 13, pp. 526-533