Publications in collaboration with researchers from Universitat Politècnica de Catalunya (35)

2018

  1. Gas dissolution foaming as a novel approach for the production of lightweight biocomposites of PHB/natural fibre fabrics

    Polymers, Vol. 10, Núm. 3

2017

  1. Effects of hydrothermal aging on the water uptake and tensile properties of PHB/flax fabric biocomposites

    Polymer Degradation and Stability, Vol. 142, pp. 129-138

2016

  1. Effect of chain extender and water-quenching on the properties of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) foams for its production by extrusion foaming

    European Polymer Journal, Vol. 85, pp. 14-25

  2. Effects of wet/dry-cycling and plasma treatments on the properties of flax nonwovens intended for composite reinforcing

    Materials, Vol. 9, Núm. 2, pp. 1-18

  3. Low density polyethylene/silica nanocomposite foams. Relationship between chemical composition, particle dispersion, cellular structure and physical properties

    European Polymer Journal, Vol. 81, pp. 173-185

2015

  1. Cellular structure and mechanical properties of starch-based foamed blocks reinforced with natural fibers and produced by microwave heating

    Industrial Crops and Products, Vol. 66, pp. 194-205

2014

  1. Strategies to improve the mechanical properties of starch-based materials: Plasticization and natural fibers reinforcement

    Polimeros, Vol. 24, Núm. SPEC. ISSUE, pp. 36-42

2013

  1. Influence of foaming process on the structure-properties relationship of foamed LDPE/silica nanocomposites

    Composites Part B: Engineering, Vol. 48, pp. 40-50

2012

  1. Foaming behavior, cellular structure and physical properties of polybenzoxazine foams

    Polymers for Advanced Technologies, Vol. 23, Núm. 5, pp. 841-849

  2. Moulded polypropylene foams produced using chemical or physical blowing agents: Structure-properties relationship

    Journal of Materials Science, Vol. 47, Núm. 15, pp. 5680-5692

  3. Optical expandometry: A technique to analyze the expansion kinetics of chemically blown thermoplastic foams

    Journal of Applied Polymer Science, Vol. 125, Núm. 2, pp. 1059-1067

  4. Thermal conductivity anisotropy in polypropylene foams prepared by supercritical CO 2 dissolution

    Materials Chemistry and Physics, Vol. 136, Núm. 1, pp. 268-276

2011

  1. Development of starch biobased and biodegradable plastics for their use in trays for food-packaging

    Society of Plastics Engineers - EUROTEC 2011 Conference Proceedings

  2. Electrical conductivity and mechanical properties of vapor-grown carbon nanofibers/trifunctional epoxy composites prepared by direct mixing

    Composites Part B: Engineering, Vol. 42, Núm. 4, pp. 675-681

  3. Heat transfer in polyolefin foams

    Advanced Structured Materials, Vol. 2, pp. 131-161

2010

  1. Foaming behavior, structure and physical properties of a novel benzoxazine resin

    Society of Plastics Engineers - FOAMS 2010, 8th International Conference on Foam Materials and Technology

  2. Heat transfer of mineral-filled polypropylene foams

    Defect and Diffusion Forum

  3. Structure and properties of Polypropylene/Hydrotalcite nanocomposites

    Polymer Composites, Vol. 31, Núm. 5, pp. 870-878

  4. The effect of anionic clay particles on the structure and thermomechanical behavior of sodium partially- Neutralized EMAA ionomer

    Journal of Applied Polymer Science, Vol. 116, Núm. 5, pp. 2573-2579

  5. Thermal conductivity of carbon nanofibre-polypropylene composite foams

    Defect and Diffusion Forum