Publicaciones en colaboración con investigadores/as de Imperial College London (19)

2023

  1. Compression performance of composite plates after multi-site impacts: A combined experimental and finite element study

    Composite Structures, Vol. 322

2022

  1. Notch fracture predictions using the Phase Field method for Ti-6Al-4V produced by Selective Laser Melting after different post-processing conditions

    Theoretical and Applied Fracture Mechanics, Vol. 121

2021

  1. Mode II fracture of an MMA adhesive layer: Theory versus experiment

    European Journal of Mechanics, A/Solids, Vol. 86

  2. TAFMEC special issue on hydrogen embrittlement of metallic materials: Fatigue and fracture

    Theoretical and Applied Fracture Mechanics

  3. Thermal conductivity of ionic liquids and ionanofluids. Can molecular theory help?

    Fluids, Vol. 6, Núm. 3

2020

  1. Analysis of hydrogen permeation tests considering two different modelling approaches for grain boundary trapping in iron

    International Journal of Fracture, Vol. 223, Núm. 1-2, pp. 17-35

  2. Generalised boundary conditions for hydrogen transport at crack tips

    Corrosion Science, Vol. 173

  3. Influence of charging conditions on simulated temperature-programmed desorption for hydrogen in metals

    International Journal of Hydrogen Energy, Vol. 45, Núm. 43, pp. 23704-23720

  4. Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation

    Theoretical and Applied Fracture Mechanics, Vol. 110

2016

  1. Use of friction mechanism for pseudo ductility in composites

    ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

2015

  1. Performance of composite fuselage after multi-site impacts

    20th International Conference on Composite Materials

  2. Phase behavior of (CO2+H2) and (CO2+N2) at temperatures between (218.15 and 303.15)K at pressures up to 15MPa

    International Journal of Greenhouse Gas Control, Vol. 36, pp. 78-92

2013

  1. Heat capacities and densities of the binary mixtures containing ethanol, cyclohexane or 1-hexene at high pressures

    Journal of Chemical Thermodynamics, Vol. 57, pp. 550-557

  2. Orientational effects and random mixing in 1-alkanol + alkanone mixtures

    Industrial and Engineering Chemistry Research, Vol. 52, Núm. 30, pp. 10317-10328

  3. Solubility of CO2 in aqueous solutions of CaCl2 or MgCl2 and in a synthetic formation brine at temperatures up to 423 K and pressures up to 40 MPa

    Journal of Chemical and Engineering Data, Vol. 58, Núm. 7, pp. 2116-2124

  4. The pH of CO2-saturated water at temperatures between 308 K and 423 K at pressures up to 15 MPa

    Journal of Supercritical Fluids, Vol. 82, pp. 129-137

2010

  1. Thermodynamic properties and equation of state of liquid di-isodecyl phthalate at temperature between (273 and 423) K and at pressures up to 140 MPa

    Journal of Chemical Thermodynamics, Vol. 42, Núm. 5, pp. 631-639

2006

  1. Measurement of the (pressure, density, temperature) relation of two (methane + nitrogen) gas mixtures at temperatures between 240 and 400 K and pressures up to 20 MPa using an accurate single-sinker densimeter

    Journal of Chemical Thermodynamics, Vol. 38, Núm. 7, pp. 916-922

  2. Speeds of sound in {(1 - x)CH4 + xN2} with x = (0.10001, 0.19999, and 0.5422) at temperatures between 170 K and 400 K and pressures up to 30 MPa

    Journal of Chemical Thermodynamics, Vol. 38, Núm. 7, pp. 929-937