Aalto University-ko ikertzaileekin lankidetzan egindako argitalpenak (21)

2024

  1. Isolation of β-O-4-Rich Lignin From Birch in High Yields Enabled by Continuous-Flow Supercritical Water Treatment

    ChemSusChem

  2. Multi-Rate Vibration Signal Analysis for Bearing Fault Detection in Induction Machines Using Supervised Learning Classifiers

    Machines, Vol. 12, Núm. 1

  3. Multi-Rate Vibration Signal Analysis for Enhanced Data-Driven Monitoring of Bearing Faults in Induction Machines

    2024 International Conference on Electrical Machines, ICEM 2024

  4. Performance Analysis of RIS/STAR-IOS-Aided V2V NOMA/OMA Communications Over Composite Fading Channels

    IEEE Transactions on Intelligent Vehicles, Vol. 9, Núm. 1, pp. 279-286

2023

  1. An efficient authentication protocol for smart grid communication based on on-chip-error-correcting physical unclonable function

    Sustainable Energy, Grids and Networks, Vol. 36

  2. Deterministic Polymorphic Engineering of MoTe2 for Photonic and Optoelectronic Applications

    Advanced Functional Materials, Vol. 33, Núm. 33

  3. MCRO-PUF: A Novel Modified Crossover RO-PUF with an Ultra-Expanded CRP Space

    Computers, Materials and Continua, Vol. 74, Núm. 3, pp. 4831-4845

  4. TDMBBO: a novel three-dimensional migration model of biogeography-based optimization (case study: facility planning and benchmark problems)

    Journal of Supercomputing, Vol. 79, Núm. 9, pp. 9715-9770

  5. Tractography passes the test: Results from the diffusion-simulated connectivity (disco) challenge

    NeuroImage, Vol. 277

  6. Unraveling Thermal Transport Properties of MoTe2 Thin Films Using the Optothermal Raman Technique

    ACS Applied Materials and Interfaces, Vol. 15, Núm. 29, pp. 35692-35700

2022

  1. Base-catalysed depolymerization of lignins in supercritical water: Influence of lignin nature and valorisation of pulping and biorefinery by-products

    Biomass and Bioenergy, Vol. 163

  2. Understanding sulfonated kraft lignin re-polymerization by ultrafast reactions in supercritical water

    Journal of Supercritical Fluids, Vol. 191

2021

  1. A feasibility study on green biorefinery of high lignin content agro-food industry waste through supercritical water treatment

    Journal of Cleaner Production, Vol. 323

2019

  1. LTSER platforms as a place-based transdisciplinary research infrastructure: learning landscape approach through evaluation

    Landscape Ecology, Vol. 34, Núm. 7, pp. 1461-1484

2018

  1. Tailoring the Structure and Morphology of Low-Molecular-Weight Cellulose Produced during Supercritical Water Hydrolysis

    ACS Sustainable Chemistry and Engineering, Vol. 6, Núm. 12, pp. 16959-16967

2016

  1. Implicit les applied to isothermal swirling coaxial jets

    American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM

2014

  1. Aerodynamic characterization of isothermal swirling flows in combustors

    International Journal of Energy and Environmental Engineering, Vol. 5, Núm. 2-3, pp. 1-6

2005

  1. Two-dimensional extension of a novel FDTD technique for modeling dispersive lossy bi-isotropic media using the auxiliary differential equation method

    IEEE Microwave and Wireless Components Letters, Vol. 15, Núm. 5, pp. 375-377

1999

  1. Calculation of the band gap energy and study of cross luminescence in alkaline-earth dihalide crystals

    Journal of the Physical Society of Japan, Vol. 68, Núm. 8, pp. 2829-2835

1998

  1. Ab initio calculations of structures and stabilities of and cluster ions

    Physical Review B - Condensed Matter and Materials Physics, Vol. 58, Núm. 15, pp. 9972-9979