Publicaciones (86) Publicaciones en las que ha participado algún/a investigador/a

2024

  1. 3D-Printed Conductive Polymers as Alternative for Bioelectrochemical Systems Electrodes: Abiotic Study and Biotic Start-Up

    Applied Sciences (Switzerland), Vol. 14, Núm. 16

  2. Additive Manufacturing of Ceramic Reference Spheres by Stereolithography (SLA)

    Applied Sciences (Switzerland), Vol. 14, Núm. 17

  3. Analysis of gaseous emission and particle number size distributions in metal casting processes with binder jetting moulds

    Building and Environment, Vol. 252, pp. 111297

  4. Coordinación vertical entre las asignaturas de Ciencia de Materiales e Ingeniería de la Fabricación impartidas en cursos sucesivos en el Grado en Ingeniería Minera

    Premios a la innovación en la enseñanza, Núm. 23, pp. 72-112

  5. Enhancing wear performance: A comparative study of traditional vs. additive manufacturing techniques for 17–4pH SS

    Wear, Vol. 540-541

  6. Fused filament fabrication of partially stabilized zirconia (3Y-TZP) parts

    Materials Letters, Vol. 355

  7. Influence of point cloud filtering on optical inspection of additive manufactured metal parts

    Precision Engineering, Vol. 90, pp. 12-20

  8. Laser Triangulation Sensors Performance in Scanning Different Materials and Finishes

    Sensors, Vol. 24, Núm. 8

2023

  1. Automatic classification of pores in aluminum castings using machine learning

    XLIV Jornadas de Automática: libro de actas: Universidad de Zaragoza, Escuela de Ingeniería y Arquitectura, 6, 7 y 8 de septiembre de 2023, Zaragoza

  2. Automatic wear detection on normalized gears made by additive manufacturing from dense 3d point clouds

    Advances in Science and Technology

  3. Characterisation of the Performance of a Structured Light Digitising Sensor by Using Different Materials and Surface Finishes

    Key Engineering Materials (Trans Tech Publications Ltd), pp. 151-159

  4. Comparison between the Effects of Normal Rain and Acid Rain on Calcareous Stones under Laboratory Simulation

    Hydrology, Vol. 10, Núm. 4

  5. Creación e implementación de Entornos Virtuales para mejorar los procesos enseñanza-aprendizaje en las Prácticas de Laboratorio

    Modelling in Science Education and Learning, Vol. 16, Núm. 1, pp. 43-54

  6. Design of Supports to Avoid Deformations in the Process of Alumina Printing by Stereolithography

    Key Engineering Materials (Trans Tech Publications Ltd), pp. 67-75

  7. Heat treatments of 17-4 PH SS processed by SLM to improve its strength and biocompatibility in biomedical applications

    Journal of Materials Research and Technology, Vol. 26, pp. 3524-3543

  8. Influence of Post-Processing on the Properties of Multi-Material Parts Obtained by Material Projection AM

    Polymers, Vol. 15, Núm. 9

  9. Inspección de productos de fabricación aditiva: medición e instrumentos

    Fabricación aditiva (UNED - Universidad Nacional de Educación a Distancia), pp. 423-453

  10. Machinability of Selective Laser Melted 17-4 PH Stainless Steel in Turning Process

    Key Engineering Materials, Vol. 956, pp. 127-133

  11. Optimization of Sandblasting to Improve the Surface Finish of 17-4PH Parts Manufactured by SLM Using Different Laser Scanning Strategies

    Key Engineering Materials (Trans Tech Publications Ltd), pp. 97-103

  12. Performance Study of Graphene Oxide as an Antierosion Coating for Ornamental and Heritage Dolostone

    Advanced Materials Technologies, Vol. 8, Núm. 18